Skip to content

E-invoice validator: check an e-invoice

This e-invoice validator checks your e-invoice against the applicable rules, with guidance on returned findings. Free within the daily limit.

No file to hand? Try a sample invoice

In short

Check an invoice against its applicable EN 16931 and national rule set. Read each finding and guidance on what to correct. Free, 10 a day without an account.

What the check covers

Klarbon checks the XML against the official schema and the business rules of the rule set for its format and version, listed below, and checks a PDF for PDF/A-3 conformance and the invoice metadata Factur-X and ZUGFeRD require. It does not verify digital signatures, and a pass does not show that the tax treatment is right or that the recipient or a platform will accept the file.

Rule sets and versions

Klarbon chooses the rule set from what the file declares. The French CIUS runs only when you ask for it on a French seller's invoice.

Specification Version Covers
EN 16931 1.3.17 UBL, CII
XRechnung 3.0.2 UBL, CII
Peppol BIS Billing 3.0 2026.5 UBL
Factur-X 1.0.9-2 MINIMUM, BASIC WL, BASIC, EN 16931, EXTENDED
Factur-X 1.0.7-3 MINIMUM, BASIC WL, BASIC, EN 16931, EXTENDED
ZUGFeRD 2.5.2 MINIMUM, BASIC WL, BASIC, EN 16931, EXTENDED
ZUGFeRD 2.3.3 MINIMUM, BASIC WL, BASIC, EN 16931, EXTENDED
NLCIUS (SI-UBL) 2.0.3.13 UBL
NLCIUS (SI-UBL) 1.0.3.13 CII
French EN 16931 CIUS 1.4.0-04 UBL, CII
KSeF FA(3) 1-0E Official schema only
Facturae 3.2.2 Official schema only
RO_CIUS and RO e-Factura 1.0.9 UBL

You can check an e-invoice with the Klarbon validator: upload the XML or hybrid PDF and it tests the file against EN 16931 and the rules for its format, such as XRechnung, Peppol BIS Billing, ZUGFeRD or Factur-X. Returned findings include rule codes and guidance where available. It is free for ten checks a day, fifty with a free account.

How do I check an e-invoice?

Upload the file; the validator detects the format and runs the rules that apply.

  1. Choose the file: UBL or CII XML, or a ZUGFeRD or Factur-X PDF.
  2. Let Klarbon pick the rules. It selects supported rules from the specification the invoice declares, for example XRechnung 3.0 in CII or Peppol BIS Billing 3.0. French national rules require selecting France.
  3. Read the report. Returned findings show the rule id and severity, with a location and correction guidance where available.
  4. Correct and recheck. Fix the invoice in your software and check the new file. If you cannot, fix the rejected e-invoice in a form: Klarbon opens the invoice as a form, corrects it and writes a new validated file for one credit.

The report always names the ruleset and version it used, so you can compare with what your customer's portal applied.

What does a report look like?

A synthetic example of two findings on an XRechnung:

Rule Severity Field What it means Fix
BR-DE-15 Error BT-10 Buyer reference XRechnung requires a buyer reference, and it is missing Enter the Leitweg-ID for a public body, or the reference your business customer gave you
BR-CO-15 Error BT-112 Invoice total with VAT The total with VAT must equal the total without VAT plus the VAT amount (OpenPeppol); here EUR 1,000.00 + EUR 190.00 does not equal the EUR 1,191.00 stated Correct the rounding so the total is EUR 1,190.00

Catalogue rule ids link to guidance where available. A schema error or uncatalogued rule may not have its own explanation page. Browse them in invoice error codes.

What is the difference between an error and a warning?

An error or fatal finding makes the selected check fail. Warnings and information are reported separately and do not by themselves make Klarbon's result fail. Fix errors first and review warnings. Neither severity nor a pass establishes whether a recipient will accept the invoice.

Which rules does Klarbon apply?

Klarbon reads the specification the file declares and runs every supported rule set that applies, side by side: the declared set and the EN 16931 rules it builds on. An XRechnung runs XRechnung 3.0 and EN 16931, a Peppol BIS invoice runs Peppol BIS Billing 3.0 and EN 16931, and a Factur-X or ZUGFeRD file in the BASIC or EN 16931 profile runs its profile and EN 16931 CII. MINIMUM, BASIC WL and EXTENDED files run their own profile only: the first two carry no invoice lines, and EXTENDED adds data the standard does not know, so EN 16931 would report errors the official profile rules do not. For hybrid PDFs the PDF container is checked too. French national rules run only when you select France, not merely because an address is French. Each rule set is pinned to a named release.

Checking is live for UBL, CII, EN 16931, XRechnung, NLCIUS and the French rules: for each, an official example passes every rule set that applies, and the same example with one known error is caught under its official rule id. Checking Peppol BIS, Factur-X and ZUGFeRD is in beta until that proof is complete. A declaration Klarbon does not support stops the check rather than silently receiving a different one.

Why do validators disagree?

Because they run different rules, or different versions of the same rules. XRechnung requires a buyer reference (BT-10, rule BR-DE-15) that EN 16931 leaves optional, so a file without one passes EN 16931 and fails XRechnung. Peppol and XRechnung require an electronic address for the seller and the buyer, which EN 16931 does not. A rule can also be an error in one set and a warning in another, or have changed between releases. Klarbon shows the result of each rule set in one table and, where they differ, says in one sentence why. Compare the rule set names and versions with those your recipient's portal applies.

What is the validation record?

After a check you can save a validation record: a page made on your device from the result, to print or save as PDF and file with the invoice. It gives the file name and its SHA-256, the date and time in UTC, the Klarbon version, each rule set with its name and version, the result per rule set, and every finding with its rule id, severity, official message and a link to its rule page. It records what these rules found in this file on that date, and nothing more; it is not a certificate. Klarbon keeps no copy of the file or of the record.

Does a valid result mean my customer will accept the invoice?

Not necessarily. A pass means the file met the selected technical rules. It does not confirm that the VAT treatment is right, that the IBAN belongs to the seller, that the goods were delivered or that the recipient has no extra requirements of their own. Technical validation is not a tax opinion.

Does a Peppol invoice need anything special?

Yes. Peppol BIS Billing 3.0 adds rules to EN 16931, for example that the business process must be stated (PEPPOL-EN16931-R001). Klarbon applies them when the file declares Peppol. It does not send the invoice over the Peppol network.

Can I check without an account?

Yes. Ten checks a day work without an account and fifty a day with a free one. Pro and Bookkeeper include up to 2,000 checks a day. See prices.

What happens to my file?

Unlike Open, Check sends the file to Klarbon's servers, where it is validated in memory and deleted after the request. Klarbon keeps no copy and logs no invoice content. See what happens to your files. If the validation service is briefly unavailable, Klarbon says so rather than reporting the file as valid or invalid, and the attempt does not count against your limit.

What next?

Frequently asked questions

How do I check whether an e-invoice is technically valid?

Upload the XML or hybrid PDF to Klarbon's e-invoice validator. It detects the format, runs EN 16931 and the matching national or network rules, and reports findings from the selected checks, with guidance where available.

What is the difference between an invoice error and a warning?

An error or fatal finding makes the selected check fail. Warnings and information are reported separately and do not by themselves make Klarbon's result fail. Recipient acceptance is a separate decision.

Does a valid result guarantee that my customer will accept the invoice?

No. A pass means the selected technical rules were met. It does not confirm the tax treatment, the amounts, the bank details, delivery or a recipient's own extra requirements.

Can I check an e-invoice without creating an account?

Yes, ten checks a day without an account and fifty with a free account. Pro and Bookkeeper have a 2000-check daily fair-use limit.

Which ruleset should I select for an e-invoice?

Usually none. Klarbon reads the specification the file declares and runs every rule set that applies to it, side by side. The report names each rule set and its version. Compare them with your recipient's requirements. A different rule set can be selected explicitly where supported, and French national checks are selected with France.

Why do two e-invoice validators give different results?

They run different rules or different versions of them. XRechnung requires a buyer reference (BR-DE-15) that EN 16931 leaves optional, so the same file can pass one and fail the other. Klarbon shows each rule set's result and says in one sentence why they differ.

Can I keep a record of the check?

Yes. Save the validation record after the check. It is made on your device and lists the file's SHA-256, the date and time in UTC, each rule set with its version and every finding. It records what those rules found on that date, and Klarbon keeps no copy.

How do I find the field mentioned in an invoice validation error?

Findings include rule codes and may include business terms, such as BT-10 buyer reference, a source location and correction guidance. Some schema or uncatalogued findings have no mapped business term or specific fix.

Sources

Updated 16 November 2026

Also as an API: E-invoice validation API